emsdiasum代理——北京百奥创新科技有限公司

类别

Bulk

Chemicals

Acetate Buffer pH 3.6-5.6

Acetic Acid and Sodium Acetate, 0.2M, pH range 3.6-5.6. Ideal for maintaining a constant pH use during fixation, our buffers are prepared fresh for each order and conveniently packaged.

Acetate Buffer

Ideal for maintaining a constant pH use during fixation, our buffers are prepared fresh for each order and conveniently packaged.

Citrate Buffer

Citric acid and Sodium citrate 0.1M with a pH range of 4.6-6.2. Ideal for use with fixation, our buffers are prepared fresh for each order and conveniently packaged.

Citrate Buffer pH 6.0 (10x)

Buffer is intended for heat-induced antigen retriever on formalin-fixed paraffin-embedded (FFPE) tissue sections prior to application of antibodies. Using this buffer on FFPE tissue section improves accessibility of antibodies to tissue antigens.

Buffers

Acetate Buffer pH 3.6-5.6

Acetic Acid and Sodium Acetate, 0.2M, pH range 3.6-5.6. Ideal for maintaining a constant pH use during fixation, our buffers are prepared fresh for each order and conveniently packaged.

Acetate Buffer

Ideal for maintaining a constant pH use during fixation, our buffers are prepared fresh for each order and conveniently packaged.

Antibody Diluent

Buffer for diluting your primary and secondary antibodies, even if stored in refrigerator. Minimizes nonspecific binding of the antibodies, negative effects of disturbing substances and low or medium affinity cross-reactivities of the antibodies.

Antibody Dilution Buffer, with Immunoglobulin- Free BSA

Ready-to-use for the dilution of antibodies in all immunoassays, including immunofluorescence, IHC, ELISA, WB . Contains immunoglobulin free BSA and does not contain phosphate, sodium azide, or mercury preservatives.

Uranyless

A new contrast stain solution for TEM negative staining applications. Amazing substitute for Uranyl Acetate. After a minute of contact, UranyLess' fast-acting, non-radioactive lanthanide mix is finished staining your sections or deposits.

Embedding Media

Araldite 502

Araldite 502 Luft's Formula. Polymerization takes place overnight so blocks can be sectioned the next day.

Araldite 6005

Also known as American Araldite. The blocks are slightly harder than those produced by Araldite 502.

Araldite, Embed 812

Araldite, (Epon-812), Mollenhauer Epon-Araldite Formula. For hard blocks and high image contrast. Blocks are easily sectioned.

DER 332-732

Three different mixtures: one for relatively soft blocks, another for harder blocks for collagenous tissue, and a tougher one if required.

Mounting Media

Acrytol® Mounting Media

Rapid-drying mounting medium which enables slides to be screened immediately. It has a low viscosity. Contains an antioxidant to inhibit stain fading and prevent the formulation of annual rings.

Fluoro-Gel (A Direct Substitute for BioMeda? Gel-Mount)

Water based mounting medium is for the permanent mounting of fluorescent stained tissues. Formulated to prevent rapid photo-bleaching in mounts of fluorescent stained tissues.

Fluoro Gel with DABCO?

Fluoro Gel w/antifading agent (DABCO?) is a ready to use aqueous mounting medium for preserving fluorescence of tissue and cell smears. Prevents photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes

Fluoro-Gel with Anti-Fading Mounting Medium

With a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. Storage in temperature of 2-8 degree C is recommended. Protect from light. DO NOT FREEZE.

IHC

R-UNIVERSAL Epitope Recovery Buffer (10x stock)

The EMS Universal Buffer may be used in any heat-induced epitope recovery system. In the Antigen Retriever (62700 Series), it guarantees the highest rate of success in recovering epitope for any antibody.

Section Block

A new class of blocking solutions based on chemically modified and fragmented ultra-pure casein. Effectively reduces unwanted binding of primary antibody and conjugates you use to charged surface of the slide and tissue section.

Antibody Diluent

Buffer for diluting your primary and secondary antibodies, even if stored in refrigerator. Minimizes nonspecific binding of the antibodies, negative effects of disturbing substances and low or medium affinity cross-reactivities of the antibodies.

HRP Conjugate Diluent

Specifically designed for preparing solution of your HRP-conjugate used as the detection reagent. It is the Antibody-dilutent buffer with additional component for stabilizing your HRP-conjugate. Allows you to further standardize the assay.

产品类别

产品名称

产品简介

Centrifuges

EMS MyFuge? Mini Centrifuge

Personal centrifuge virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes and is extremely easy to use. Includes 8-position microtube rotor and a second rotor for 0.2 mL pCR tubes and strips.

MagFuge® Centrifuge and Magnetic Stirrer

The MagFuge is the first high-speed centrifuge and magnetic stirrer, combined into one unit. This design innovation enables a substantial cost savings for labs by not having to purchase two pieces of equipment because the MagFuge does it all.

Gusto® High Speed Mini-Centrifuge

Compact centrifuge for fast spins (up to 12,500 rpm / 9,800 rcf) and quick spindowns. Useful for PCR, microfilter cell separation, clinical applications, and HPLC protocols.

6-Place Table Top Centrifuge

Powerful, quiet, centrifuge for table top use with variable 30-minute timer, standard locking lid, and six place rotor. 7, 10 or 15 mL tube capacity without the added expense of extra tube carriers.

Dry Baths

EMS MyBlock? Mini Dry Bath

MyBlock Mini Digital Dry Bath is the perfect tool for laboratory incubations. It features a compact design that fits on any crowded benchtop, broad temperature range, multiple block options, and a simple touchpad with digital control.

EMS MyBlock? I Dry Bath, Single Chamber, w/o blocks, 115V

Features digital temperature control to set and walk away, hinged lid that improves uniformity and conserves energy, and external temperature probe that measures sample temperature.

EMS MyBath? Water Bath, 2L, 115V

Water bath features superior accuracy and performance in a compact footprint. Seamless, stainless steel chambers for easy cleaning and long life.

MODULAR BLOCKS, TEST TUBE, 6MM, EACH

Solid anodized aluminum blocks provide maximum heat retention. blocks include thermometer well for easily measuring block temperature. Fit all our Modular Block Dri-Baths.